L6727TR

L6727TR Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.1V~13.2V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. With this switching controller, you can switch at 300kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Phase Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 8. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Search for "L6727" to find other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 800mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 30A. The duty cycle of the voltage regulator dc to dc can be set to 80 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. 350kHz is the maximum frequency of this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 13.2V. Since the dc switcher's maximum input voltage is 13.2V, the voltage must be regulated accordingly. Switching controller is necessary to have a supply voltage of 4.1V. Neither the voltage controller's lowest voltage output 800mVr its highest voltage output is less than 800mV. In the presence of a current greater than 6mA, the component may fail to operate properly and may be damaged.

L6727TR Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %

L6727TR Applications

There are a lot of STMicroelectronics L6727TR DC to DC converter applications.

• Refrigerators of central air conditioners
• Computer monitoring equipment of building
• Machining centers
• Serial communication converter
• Energy management systems
• Flaw detection equipment
• Various precision measuring instruments
• Driver circuits
• Planers
• Telecommunications equipment