LC4032B-25T48C

LC4032B-25T48C Overview

There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As you can see, this device has 32 I/O ports programmed into it.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.A voltage of 2.5Vprovides power to the device.This part is part of the family [0].It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.It belongs to the ispMACH? 4000Bseries of FPGAs.There are 48pins on the chip.When using this device, YEScan also be found.According to the LC4032, its related parts can be found.In digital circuits, 800gates serve as building blocks.It is recommended that the supply voltage be kept at 2.5Vto maximize efficiency.Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.It is designed with 48 pins.A maximum supply voltage of 2.7Vis used in its operation.It operates with the minimal supply voltage of 2.3V.A total of 100 Programmable I/Os are available.There should be a lower maximum frequency than 400MHz.Input signals are detected using 4dedicated inputs.In order to form a fundamental building block, there are 2 logic elements or cells.

LC4032B-25T48C Features

48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins

LC4032B-25T48C Applications

There are a lot of Lattice Semiconductor Corporation LC4032B-25T48C CPLDs applications.

• POWER-SAVING MODES
• Multiple Clock Source Selection
• State machine control
• Interface bridging
• Digital multiplexers
• DMA control
• Bootloaders for FPGAs
• DDC INTERFACE
• Power up sequencing
• Handheld digital devices