LC4064ZC-75TN100I

LC4064ZC-75TN100I Overview

This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].There are 64 I/Os on the board.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 1.8V volts.It is a part of the family [0].Package the chip by Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.There are 100pins on the chip.If you use this device, you will also find [0].The LC4064indicates that related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountis used to mount this electronic component.A total of 100pins are provided on this board.A maximum voltage of 1.9Vis required for operation.Initially, it requires a voltage of 1.7Vas the minimum supply voltage.4logic blocks/elements are present.There is a maximum frequency of 178.57MHz.The status of input signals is determined by 10dedicated inputs.As a fundamental building block, there are 36 logic elements/cells.

LC4064ZC-75TN100I Features

100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins

LC4064ZC-75TN100I Applications

There are a lot of Lattice Semiconductor Corporation LC4064ZC-75TN100I CPLDs applications.

• Field programmable gate
• Multiple Clock Source Selection
• ON-CHIP OSCILLATOR CIRCUIT
• Auxiliary Power Supply Isolated and Non-isolated
• D/T registers and latches
• I2C BUS INTERFACE
• Software Configuration of Add-In Boards
• Digital designs
• Page register
• Wireless Infrastructure Base Band Unit and Remote Radio Unit