LC4256C-10T176I

LC4256C-10T176I Overview

There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As you can see, this device has 128 I/O ports programmed into it.The device is programmed with 176 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 1.8Vprovides power to the device.This part is included in Programmable Logic Devices.Package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.It is programmed with 176 pins.This device can also display [0].The LC4256contains its related parts.A high level of efficiency can be achieved by maintaining the supply voltage at [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.The 176pins are designed into the board.A maximum supply voltage of 1.95Vis used in its operation.It is powered by 1.65Vas its minimum supply voltage.It is recommended not to exceed 322MHzin terms of frequency.To detect input signals, there are 4 dedicated inputs.Fundamental building blocks consist of 16logic elements/cells.

LC4256C-10T176I Features

176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins

LC4256C-10T176I Applications

There are a lot of Lattice Semiconductor Corporation LC4256C-10T176I CPLDs applications.

• Multiple DIP Switch Replacement
• Software-Driven Hardware Configuration
• Programmable power management
• Multiple Clock Source Selection
• Timing control
• Reset swapping
• I/O PORTS (MCU MODULE)
• Pattern recognition
• Voltage level translation
• STANDARD SERIAL INTERFACE UART