LM25037QMT/NOPB

LM25037QMT/NOPB Overview

It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 5.5V~75V and has a 5.5V~75V supply voltage. Work well in dc switchers with a -40°C~125°C TJ. There is a switch at 200kHz~515kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Dead Time Control, Enable, Ramp, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics will be returned if you search "LM25037". 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 200mV voltage. You should note that the dc dc regulator's usual output current is 100mA. The maximum duty cycle of this voltage regulator dc to dc is set to 96 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controllers operate at 2MHz frequencies. To better satisfy the need, DC to DC voltage regulator has a value of IT ALSO OPERATES IN CURRENT MODE. The dc to dc voltage regulator is from the Automotive, AEC-Q100 series. It is possible to set the input voltage as 75V for nominal working statuses. It runs on a supply current of 45μA. Having a current greater than 4mA may result in improper operation and possibly damage to the component.

LM25037QMT/NOPB Features

Transistor Driver Outputs
Switching Frequency: 200kHz~515kHz
Current Limit, Dead Time Control, Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 2MHz
IT ALSO OPERATES IN CURRENT MODE

LM25037QMT/NOPB Applications

There are a lot of Texas Instruments LM25037QMT/NOPB DC to DC converter applications.

• Computed tomography (CT)
• Automation technology
• Experimental setup
• Ball screw pair
• Combined machine tools
• Medical equipment
• Adjustable voltage or current linear circuits
• Various CNC machine tools
• Remotely powered electric motors
• Drilling machines