LM25088QMH-1/NOPB

LM25088QMH-1/NOPB Overview

It comes in a 16-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~42V. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 50kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 24V. A search for "LM25088" will reveal other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, the DC regulator outputs 40V voltage. normally, the dc dc regulator's output current is 2A, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 97 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz on this dc regulators. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 42V. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. During dormancy, the dc switching uses 3.2mA. The supply voltage should be 24V. There should be 4.5mA current exceeding 4.5mA supplied to the controller.

LM25088QMH-1/NOPB Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %

LM25088QMH-1/NOPB Applications

There are a lot of Texas Instruments LM25088QMH-1/NOPB DC to DC converter applications.

• Digital video recorders
• Bending machines
• Product testing
• Energy management systems
• Digital display device
• Hydraulic presses
• Wind power
• Driver circuits
• Sink circuits
• Die casting equipment