LM2747MTC/NOPB

LM2747MTC/NOPB Overview

It comes in the 14-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. Tube is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. 3V~6V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. The switching controller can be switched at 50kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 14. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3.3V is input. LM2747 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 14 pins. As determined by the test statistics, the output voltage of DC regulator is 13.5V. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. voltage regulator dc to dcs with a 86 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. This dc regulatorhas a max frequency of 1MHz. DC to DC voltage regulator has the value of OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.6V to better satisfy the requirement. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 17V. Dormant dc switchings use 1.7mA. Since the dc switcher's maximum input voltage is 6V, the voltage must be regulated accordingly. Voltage 3V is needed for the supply. Its lowest voltage output is not less than 600mV. With this controller, the phase is 1.

LM2747MTC/NOPB Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %
OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.6V

LM2747MTC/NOPB Applications

There are a lot of Texas Instruments LM2747MTC/NOPB DC to DC converter applications.

• Program control systems
• Flexible manufacturing cells
• Milling machines
• Digital precision reference circuits
• Window air conditioners
• Wide-range voltage regulation circuits
• Boring machines
• Balance equipment
• Large fire protection systems
• Computer rooms