LM27951SD

LM27951SD Overview

In order to save board space, the led driver uses the 14-WFDFN Exposed Pad package. Surface Mount is used for mounting the led light driver.As a DC DC Regulator, it has high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits of Backlight are considerable.The system operates with a termination of 0.This LED driver is configured with a base of 14 pins.If the voltage supply is below 2.8V, undetermined failures may occur.The number of segments is estimated to be 4.The device has been mounted on the Surface Mount.It's under the LM27951 base part number.In this device, the output voltage is 2.5V~3.9V volts.There are 14 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.When the input voltage is set to 2.8V, it operates.Supply current cannot exceed 5.5V.You can supply 30mA current to the load.Powering systems requires 5.5V voltages.When the switching frequency is maintained at 750kHz, this electronic component is able to fully play its functions.A current of 1.5mA is consumed in the absence of external influences.

LM27951SD Features

Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Switching frequency of 750kHz

LM27951SD Applications

There are a lot of Texas Instruments LM27951SD LED Driver ICs applications.

• Stage Lighting and Signage
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• Refrigeration lighting
• Industrial LED Lighting: Image Recognition Devices
• Portable lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Panel lighting
• Constant Voltage Power Source for portable equipment
• LED Lighting PFCs, Linear Dimmable
• White LED Backlight for portable equipment