LM2901DRE4

LM2901DRE4 Overview

The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.This device is designed in Tape & Reel (TR) case.As you can see, the comparator has14 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 4 elements.Electronic comparator has 14 pins.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.14 pins are available on the comparator.Search LM2901 to find more pin-to-pin solutions.In this comparator, the quiescent current is 2.5mA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 2mA when using the device.A current supply greater than 2mA may cause the comparator to malfunction.The device can be powered by 5V power supplies.Based on the voltage formula, the voltage gain of the part is 100dB .With a TR package, this device is designed for general use (usually in ADC circuits).

LM2901DRE4 Features

CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

LM2901DRE4 Applications

There are a lot of Texas Instruments LM2901DRE4 linear comparators applications.

• Wearable Devices
• Zero-Crossing Detectors
• Body Control Modules
• High-Speed Differential Line Receiver
• Wide Range VCO; MOS Clock Timers
• Multivibrators and High-Voltage Digital Logic Gates
• Limit Comparators
• Simple Analog-to-Digital Converters (ADCs)
• General-Purpose, Low-Voltage Applications
• Window Comparators