LM2901QPWRQ1

LM2901QPWRQ1 Overview

A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .There is a CMOS, MOS, Open-Collector, TTL output type for this comparator.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical Differential comparator.Electronic comparator consists of 4 elements in total.As a result, it contains 14 pins.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.14 pins are present on the comparator.You can find more pin-to-pin solutions by searching LM2901 .As a result, this comparator displays a quiescent current of 2.5mA .A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 2mA .A current supply greater than 2mA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.You are allowed to input a maximum current of 250nA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.This part is from the Automotive, AEC-Q100 comparator series.The device is acceptable to pack by TR .

LM2901QPWRQ1 Features

CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

LM2901QPWRQ1 Applications

There are a lot of Texas Instruments LM2901QPWRQ1 linear comparators applications.

• Consumer Medical Electronics
• Window Comparators
• General-Purpose, Low-Voltage Applications
• Current and voltage sensing
• Point of load regulators
• Power management
• Automotive
• Portable Battery Monitoring
• Analog front end
• Battery management and protection