LM2907N-8

LM2907N-8 Overview

Located within the 8-DIP (0.300, 7.62mm) package, it can be found here. The electronic part is mounted in the direction of Through Hole. There is a package in the way of Tube. The type of this electrical device is Frequency to Voltage. There is a technique known as 8 termination, in which a transmission line is terminated with a device that matches its characteristic impedance. The device is equipped with a pin count of 8. 12V is the supply voltage that supplies power to the device. The base part number can be used to establish parts related to it. In computers and other communications devices, there are 8 pins, which are pronged contacts. This device is designed to operate at a minimum operating temperature -40°C to ensure its reliability. In order to ensure the reliability of the device, it operates at the maximum operating temperature of 85°C. A Through Hole mounting is used. In Analog Special Function Converters, this part is included. This should be used if the supply voltage (Vsup) exceeds 12V. Currently, the maximum supply voltage (Vsup) reaches 28V. The frequency at which it operates is given by 5kHz. It is necessary to supply 25mA with a current so that it can fully perform its function. There is an output voltage of 8.3V supported by it. In this electrical device, the bandwidth is 10 kHz.

LM2907N-8 Features

8-DIP (0.300, 7.62mm) package
8 terminations
8 pin count
8 pins

LM2907N-8 Applications

There are a lot of Texas Instruments LM2907N-8 V/F & F/V Converters applications.

• Cruise Control
• Frequency to Voltage Conversions
• Isol ated data transmission
• Hand-Held Tachometers
• Serial frequency output
• Microprocessor Data Acqusition
• 13-bit Analog-to-Digital Converters (ADC)
• Clutch Control
• Motor Control
• Battery Monitoring