LM293ADGKR

LM293ADGKR Overview

For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.Electronic comparator is shipped by Cut Tape (CT) .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In terms of type, this is a typical Differential comparator.In total, it contains 2 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -25°C~85°C to avoid mal-function.There are 8 pins on the comparator.Search LM293 to find more pin-to-pin solutions.A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 1mA .The compartator could be damaged if the current supply exceeds 500μA .5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 250nA current into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.The device is packaged in TR and is often used in ADC circuits.

LM293ADGKR Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM293ADGKR Applications

There are a lot of Texas Instruments LM293ADGKR linear comparators applications.

• Set Top Boxes
• Wearable Devices
• RC Timers
• Body Control Modules
• Portable Battery Monitoring
• Consumer Medical Electronics
• Wireless Base Stations
• Ultra-Low Power Systems
• Multivibrators and High-Voltage Digital Logic Gates
• Mobile Communications