LM293ADRG4

LM293ADRG4 Overview

The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.This chip is designed with the Tape & Reel (TR) package.The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical Differential comparator.Currently, it consists of only 2 elements.The board includes 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -25°C~85°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM293 .In this comparator, the quiescent current is 2.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.5/30V power supplies are enough to run the device.The voltage formula shows that the part has a voltage gain of 106.02dB .Normal operation requires 28V operating supply voltage.With a TR package, this device is designed for general use (usually in ADC circuits).

LM293ADRG4 Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM293ADRG4 Applications

There are a lot of Texas Instruments LM293ADRG4 linear comparators applications.

• Zero-Crossing Detectors
• Automotive
• Wearable Devices
• General Purpose Low Voltage Applications
• Window Comparators
• Point of load regulators
• Limit Comparators
• Security Detection Systems
• Battery management and protection
• Body Control Modules