LM306DRG4

LM306DRG4 Overview

In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Push-Pull, TTL output is used here.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.When supplied with 12V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as Differential .Electronic comparator consists of 1 elements in total.The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM306 .There is a quiescent current of 10mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 10mA .Current supply exceeding 10mA could cause disfunction of the compartator.Comparator electronics follows that the voltage gain of the part is 92.04dB .

LM306DRG4 Features

Push-Pull, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 92.04dB

LM306DRG4 Applications

There are a lot of Texas Instruments LM306DRG4 linear comparators applications.

• Wide Range VCO; MOS Clock Timers
• DC/DC and AC/DC power supplies
• Zero-Crossing Detectors
• Analog front end
• Ultra-Low Power Systems
• General-Purpose Portable Devices
• Window Comparators, Multivibrators
• Window Comparators
• RC Timers
• Security Detection Systems