LM339ADBR

LM339ADBR Overview

The product is packaged in 14-SSOP (0.209, 5.30mm Width) in order to facilitate transportation.There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.The chip is packaged with Tape & Reel (TR) .There are14 terminals on the comparator.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a Differential chip.A total of 4 elements can be found in it.The pinout of the component starts from 14 pins it has.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.Electronic comparator has 14 pins.If you require more pin-to-pin solutions, search LM339 for more options.In this comparator, the quiescent current is 2.5mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 500μA .An excess of current supply over 500μA could result in malfunction of the comparator.This device requires 5V power supplies to operate.Based on the voltage formula, the voltage gain of the part is 106.02dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.

LM339ADBR Features

CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM339ADBR Applications

There are a lot of Texas Instruments LM339ADBR linear comparators applications.

• Window Comparators, Multivibrators
• Lithium ion battery monitoring
• Wearable Devices
• Limit Comparators
• High-Speed Differential Line Receiver
• Ultra-Low Power Systems
• Battery-Powered Electronics
• Body Control Modules
• Zero-Crossing Detectors
• Infotainment and Clusters