LM339ADG4

LM339ADG4 Overview

In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, MOS, Open-Collector, TTL .The part will be shipped by Tube .You can find 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical Differential comparator.There are a total of 4 elements in it.There are 14 pins on this board.Surface Mount universial mout for easy adapting.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.14 pins are available on the comparator.Alternatively, you may search for LM339 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 2.5mA .A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 2mA when using the device.A current supply greater than 500μA may result in the comparator malfunctioning.5V power supplies are enough to run the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .The operating supply voltage for normal operation should be 28V .

LM339ADG4 Features

CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM339ADG4 Applications

There are a lot of Texas Instruments LM339ADG4 linear comparators applications.

• Analog front end
• Point of load regulators
• Window Comparators, Multivibrators
• General Purpose Low Voltage Applications
• Zero-Crossing Detectors
• High-Speed Sampling Circuits
• Limit Comparators
• Multivibrators and High-Voltage Digital Logic Gates
• Mobile Phones and Tablets
• Security Detection Systems