LM339ADRE4

LM339ADRE4 Overview

Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a CMOS, MOS, Open-Collector, TTL output.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type Differential .A total of 4 elements can be found in it.The device includes 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.This comparator has 14 pins.Alternatively, you may search for LM339 to find more pin-to-pin solutions for your specific needs.A quiescent current of 2.5mA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 500μA .If the current supply exceeds 500μA , the comparator might be damaged.In order to operate the device, 5V power supplies are sufficient.You can input a maximum current of 250nA into this device.The voltage formula shows that the part has a voltage gain of 106.02dB .The device is acceptable to pack by TR .

LM339ADRE4 Features

CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM339ADRE4 Applications

There are a lot of Texas Instruments LM339ADRE4 linear comparators applications.

• Pulse, Squarewave, and Time Delay Generators
• Wearable Devices
• General-Purpose Portable Devices
• Ultra-Low Power Systems
• Motor drives
• DC/DC and AC/DC power supplies
• Battery management and protection
• Analog front end
• Handheld Instruments
• Power management