LM339MX

LM339MX Overview

The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.The part is shipped by Tape & Reel (TR) .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .The pinout of the component starts from 14 pins it has.The recommended mounting method is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .14 pins are present on the comparator.You can find more pin-to-pin solutions by searching LM339 .This comparator presents a quiescent current of 2.5mA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 1.1mA in order to use the device normally.An excess of current supply over 2mA could result in malfunction of the comparator.The device can be operated with 5V power supplies.You are allowed to input a maximum current of 250nA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Often found in ADC circuits, this device is packed in TR .

LM339MX Features

CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM339MX Applications

There are a lot of Texas Instruments LM339MX linear comparators applications.

• Point of load regulators
• System control and monitoring
• Ultra-Low Power Systems
• Window Comparators, Multivibrators
• Infotainment & cluster
• Factory automation & control
• Appliances
• Notebooks and PDAs
• Building automation
• Pulse, Squarewave, and Time Delay Generators