LM3421Q1MH/NOPB

LM3421Q1MH/NOPB Overview

16-PowerTSSOP (0.173, 4.40mm Width) saves board space. Typically, LED drivers have 1 outputs.Surface Mount is used to mount the led driver.It emerges as a DC DC Controller with high efficiency.At -40°C~125°C TJ, the led driver is capable of operating.It operates with 16 terminations.A configuration of this chip is made up of 16 pins.The segment count is 1.It's mounted on the way to Surface Mount.The LED driver is available under the part number LM3421.There is no maximum value acceptable for the supply voltage, so 75V is acceptable.There is a voltage output of 3V~72V.In this device, there are 16 pins.As its minimal input voltage, it operates at a voltage of 4.5V.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.It is possible to supply current up to 75V.As long as the maximum supply current is under 3mA, it can deliver high efficiency.In this case, the load can only be supplied with 1A current.This electronic component may perform its functions fully if the switching frequency is maintained at 2MHz.LED drivers belonging to the series Automotive, AEC-Q100 are important components in a wide range of applications.Absent external factors, there is 2mA consumption of current.

LM3421Q1MH/NOPB Features

Available in the 16-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Supply voltage of 14V
Switching frequency of 2MHz

LM3421Q1MH/NOPB Applications

There are a lot of Texas Instruments LM3421Q1MH/NOPB LED Driver ICs applications.

• Constant Voltage Power Source for portable equipment
• General lighting
• Architectural lighting
• LED Lighting PFCs, Linear Dimmable
• Street lighting
• LED Lightings for Industrial Equipment
• White LED Backlight for portable equipment
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Portable lighting
• Power source for accessories such as car audios, car navigation systems, and ETC systems