LM3502ITL-25/NOPB

LM3502ITL-25/NOPB Overview

10-WFBGA, DSBGA saves board space. LED drivers use 2 outputs for their design.In order to mount the led light driver, Surface Mount is used.It is highly performing and reliable when it emerges as a DC DC Regulator.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.A number of benefits are available to Backlight.The operation of this system is supported by 10 terminations.With a base of 10, this LED light driver is configured.In the absence of a voltage supply of at least 2.5V, undetermined failures may occur.Segments counted are 2.It is mounted in the way of Surface Mount.This LED driver can be found under the base part number LM3502.The voltage of 5.5V is acceptable.The voltage output by it is 25V.As a result, it is designed to operate at a minimal voltage of 2.5V to ensure the most efficiency possible.When the maximum supply current is less than 3mA, the device is able to provide a high level of efficiency.The current that can be supplied to the load is 600mA.It's possible for this electronic component to fully function when the switching frequency is maintained at 1MHz.No external factors result in 1.9mA current consumption.

LM3502ITL-25/NOPB Features

Available in the 10-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz

LM3502ITL-25/NOPB Applications

There are a lot of Texas Instruments LM3502ITL-25/NOPB LED Driver ICs applications.

• Down lighting
• Dimmable LED for vehicle interiors
• Replacement lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Medical surgery lighting
• LED Lightings for Inspection Devices
• LED backlight driver for LCD displays for portable equipment
• Sports Facility Lighting
• Flicker-free LED Lighting using R1580N
• Museum lighting