LM3524DN

LM3524DN Overview

With a 16-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 8V~40V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where 0°C~125°C TJ is the 0°C~125°C TJrm. dc dc regulators can be carried out with Through Hole. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . 16 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. You can find other relevant dc to dc converter ics by searching "LM3524". 16 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 60V voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 49 % on power-up or power-down to ensure reliability. In most applications and prototype designs, DC switcher is qualified as a Through Hole. The switching controller works at a frequency of 350kHz. Dormant dc switchings use 5mA. A nominal working status is achieved when the input voltage is set to 8V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 40V. The dc switcher will not provide an output current greater than 200mA. The datasheet indicates that the switching converter can output 5V volts at its maximum. This controller performs best at a frequency of 350kHz.

LM3524DN Features

Transistor Driver Outputs
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 350kHz
Switching Frequency: 350kHz

LM3524DN Applications

There are a lot of Texas Instruments LM3524DN DC to DC converter applications.

• Medical monitoring systems
• Hydrogen power
• Balance equipment
• Flexible manufacturing cells
• Automation technology
• Series voltage regulation circuits
• Constant current circuits
• Scientific testing
• Sensitive electronic devices
• Direct power supply system