LM3658SDX-A

LM3658SDX-A Overview

It is contained in the package Tape & Reel (TR).For convenience, it is included in the 10-WFDFN Exposed Pad package.It appears that the device's mounting type is Surface Mount.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.To charge the device, Constant - Programmable current is required.Parts related to the base part number LM3658 can be found based on that number.It contains 10 terminations, so that is how many there are.The device has 10 pins in total.As long as it is charged at maximum current, it will be rated as 1A.It operates on the basis of 10 pins.It is possible to access 1 channels.This should be able to operate off of a battery that has a voltage of 5V.In the case of 4.2V, the output voltage is likely to produce high efficiency.The output current is set to 1A in this case.This device is a member of subcategory Power Management Circuits.As far as the mounting is concerned, it is mounted in the way of Surface Mount.A power supply setting of 0 has been assigned to the part.It is recommended that the supply voltage be set to 6V for maximum efficiency.During normal operation, Vsup should remain above 4.5V.In addition to the features above, the device can also generate the following features of RESTART THRESHOLD VOLTAGE IS 4 VOLT.

LM3658SDX-A Features

1 channels
Power Management Circuits subcategory
Addtional features of RESTART THRESHOLD VOLTAGE IS 4 VOLT
10-WFDFN Exposed Pad package

LM3658SDX-A Applications

There are a lot of Texas Instruments LM3658SDX-A Battery Chargers ICs applications.

• Model aircraft
• Drone
• Mobile point-of-sale (mPOS) terminals
• Robot
• Fleet management
• Embedded automotive applications
• Electricity bank
• Tablets
• Man lift
• TV sticks