LM393APWRE4

LM393APWRE4 Overview

The product is packaged in 8-TSSOP (0.173, 4.40mm Width) for ease of transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical Differential comparator.A total of 2 elements can be found in it.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM393 .There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 1mA .An excess of current supply over 500μA could result in malfunction of the comparator.In order to operate the device, 5V power supplies are sufficient.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Often found in ADC circuits, this device is packed in TR .

LM393APWRE4 Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM393APWRE4 Applications

There are a lot of Texas Instruments LM393APWRE4 linear comparators applications.

• Lithium ion battery monitoring
• Current and voltage sensing
• Factory automation & control
• General Purpose Low Voltage Applications
• Notebooks and PDAs
• Motor drives
• Automatic Test Equipment
• Zero-Crossing Detectors
• Wide Range VCO; MOS Clock Timers
• Simple Analog-to-Digital Converters (ADCs)