LM48820TM/NOPB

LM48820TM/NOPB Overview

In the 14-WFBGA, DSBGA package, it is embedded.Amp parts is packaged in the way of Tape & Reel (TR) .The 14 termination refers to terminating transmission lines with devices that match their characteristic impedance.Amp parts uses Headphones, 2-Channel (Stereo) as Amp partss output.This electrical device has the type Class AB .As part of a signal interface in a computer or other communication device, there are 14 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .This electrical device is powered by 1.6V~4.5V volts.Currently, the device has only 2 channels.Operation can be ensured by Depop, Shutdown, Thermal Protection .No temperature higher than -40°C~85°C TA should be used for operations.The device is equipped with a total of 14 pins.There is a part belonging to Audio/Video Amplifiers .Amp parts belongs to LM48820 family.Amp parts is recommended to mount the chip in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 95mW kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 1.6V .The maximum supply voltage (Vsup) is reached at 5V .There is a Single supply type on this electronic part.Power is supplied by a 3V volt source.Amp parts belongs to the Boomer? series of electronic components.Furthermore, amplifier parts supplier is characterized by a SNR IS 100DB .

LM48820TM/NOPB Features

14-WFBGA, DSBGA package
14 pin count
LM48820 family
95mW kWh per hour
Boomer? series

LM48820TM/NOPB Applications

There are a lot of Texas Instruments LM48820TM/NOPB audio amplifiers applications.

• High/low-pass filter circuit
• Switching amplifier
• Communication device
• Power control
• High input resistance broadband
• Fast A/D and D/A converters, video amplifiers
• Oscilloscopes
• Instrumentation
• Inverse/same-phase proportional circuit
• pH (acidity)