LMC568CM/NOPB

LMC568CM/NOPB Overview

This clock IC is packaged using the Tube method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. 8 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 5V. This Clock PLL will be fed by Clock as its input. 700kHz is the maximal value for normal operation. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 9V of power as a maximum supply voltageThe supply voltage (Vsup) should be kept above 2V for normal operation. As long as you provide 2V~9V supply voltage, it will work. Based on test statistics, ambient temperature should be set at -25°C~125°C. This electronic component is usually classified as a Clock Generator component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. According to the base part number, its related parts can be founded. There is an available 8 pin on the PLL. The maximum supply voltage that analog clock generator can handle is 5V. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. 1 signal outputs allow for maximi1ation of output frequency. By operating at a frequency of 500kHz, RF synthesizer is able to reali500kHze high efficiency. To fully perform its function, time clock generator requires a supply current of 350μA. In this RF synthesizer operation, 2.4mA of current are supplied.

LMC568CM/NOPB Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

LMC568CM/NOPB Applications

There are a lot of Texas Instruments LMC568CM/NOPB Clock Generators applications.

• Microwave radio
• Ports
• Electronic countermeasures
• Signal modulation and demodulation
• Coherent carrier tracking
• Smartphones
• Telecommunication systems
• Frequency synthesis
• Cellular/4G
• Radar