LMC7215IMX/NOPB

LMC7215IMX/NOPB Overview

For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.The part is shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparator family.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.This is a 1 element comparator.The device contains 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 8 pins.You may wish to search LMC7215 for more solutions that address your specific needs.There is a quiescent current of 1μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 1μA when using the device.If the current supply exceeds 1μA , the comparator could malfunction.In order to run the device, there are only 2.7/5V power supplies required.In accordance with the voltage formula, the part's voltage gain is 140dB .Comparator electronics is acceptable to pack the device by TR .

LMC7215IMX/NOPB Features

Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
Voltage Gain: 140dB

LMC7215IMX/NOPB Applications

There are a lot of Texas Instruments LMC7215IMX/NOPB linear comparators applications.

• Analog front end
• Portable Battery Monitoring
• General-Purpose Portable Devices
• Automotive
• Factory automation & control
• Point of load regulators
• General Purpose Low Voltage Applications
• Handheld Instruments
• Appliances
• Security Detection Systems