All Products

LMP2231BMFE/NOPB

1 Channels 30mA per Channel 0.02pA 81 dB Instrumentational OP Amps 1.6V~5.5V LMP2231 5 Pins SC-74A, SOT-753

Manufacturer: Texas Instruments
Origchip NO: 815-LMP2231BMFE/NOPB
Package: SC-74A, SOT-753
Datasheet: -
Stock: 127
Description: 1 Channels 30mA per Channel 0.02pA 81 dB Instrumentational OP Amps 1.6V~5.5V LMP2231 5 Pins SC-74A, SOT-753(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Output Current	30mA
Slew Rate	0.058V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	81 dB
Current - Input Bias	0.02pA
Voltage - Supply, Single/Dual (±)	1.6V~5.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	150μV
Bandwidth	130 kHz
Unity Gain BW-Nom	130 kHz
Voltage Gain	120dB
Power Supply Rejection Ratio (PSRR)	83dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	10μV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	LMP®, PowerWise®
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	LMP2231
Pin Count	5
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	10μA
Nominal Supply Current	10μA

LMP2231BMFE/NOPB Overview

In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. Linear amplifier has a total of 5 pins. Please take in mind that op amp should be run at 1.8V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 10μA . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. TR is adopted to pack the instrumentation amplifier. This buffer amplifier is assigned within the LMP?, PowerWise? series by its manufacturer.

LMP2231BMFE/NOPB Features

5 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail

LMP2231BMFE/NOPB Applications

There are a lot of Texas Instruments LMP2231BMFE/NOPB Instrumentational OP Amps applications.

Blood pressure sensors
Gaming industry
High gain DC amplifier
Strain gauges
Mobile phone
Hand-held batteries
Oscilloscopes
Weak signal detection
Portable electronic products powered by batteries
Power transmission