LP211DR

LP211DR Overview

Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has an output type of Open-Collector, Open-Emitter .We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Other Comparator like the device play a important role in the industry.A comparator supplied with 15V voltage can complete many demanding tasks.This is a typical comparator of type Differential .There are a total of 1 elements in it.There are 8 pins on this board.A Surface Mount mounting type is recommended.The operating temperature should be set to -25°C~85°C to avoid mal-function.8 pins are available on the comparator.You can search LP211 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 300μA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 300μA for normal use.A current supply greater than 300μA may result in the comparator malfunctioning.Comparator electronics follows that the voltage gain of the part is 100dB .A normal operation requires a voltage of 28V .Packed in TR , this device is for general uses (often in ADC circuits).

LP211DR Features

Open-Collector, Open-Emitter output capability
Differential IC
Employing 1 elements
Operates under -25°C~85°C
Quiescent Current: 300μA
Voltage Gain: 100dB

LP211DR Applications

There are a lot of Texas Instruments LP211DR linear comparators applications.

• Mobile Phones
• Current and voltage sensing
• Self-diagnostics
• Point of load regulators
• Analog front end
• Automatic Test Equipment
• Motor drives
• Metering Systems
• Infotainment and Clusters
• Zero-Crossing Detectors