LP3470IM5-2.83/NOPB

LP3470IM5-2.83/NOPB Overview

A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. In a 1V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 5 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 500mV volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 16μA. It is always advisable to use LP3470, the base supervisor number, when searching for similar PMICs from the manufacturer.

LP3470IM5-2.83/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470IM5-2.83/NOPB Applications

There are a lot of Texas Instruments LP3470IM5-2.83/NOPB Voltage Supervisors applications.

• Microprocessor system
• Magnetic resonance imaging
• Automotive power systems
• WiFi router
• Multi-voltage system
• Low voltage/high power - AI, GPU
• Transformer load monitoring equipment
• Functional modules
• Detection of phase sequence
• Important electronics for automotive safety