All Products

LT1994HDD#PBF

1 Channels 85mA per Channel 18μA 55 dB Instrumentational OP Amps 3μA 2.375V~12.6V ±1.188V~6.3V LT1994 8 Pins 8-WFDFN Exposed Pad

Manufacturer: Linear Technology/Analog Devices
Origchip NO: 471-LT1994HDD#PBF
Package: 8-WFDFN Exposed Pad
Datasheet: PDF
Stock: 893
Description: 1 Channels 85mA per Channel 18μA 55 dB Instrumentational OP Amps 3μA 2.375V~12.6V ±1.188V~6.3V LT1994 8 Pins 8-WFDFN Exposed Pad(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WFDFN Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2009
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	700kOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	250
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	LT1994
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	14.8mA
Nominal Supply Current	13.3mA
Output Current	85mA
Slew Rate	65V/μs
Amplifier Type	Differential
Common Mode Rejection Ratio	55 dB
Current - Input Bias	18μA
Voltage - Supply, Single/Dual (±)	2.375V~12.6V ±1.188V~6.3V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2mV
Bandwidth	70MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	70000 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	3μA
Power Supply Rejection Ratio (PSRR)	69dB
Supply Voltage Limit-Max	6.3V
Voltage - Input Offset	3mV
Neg Supply Voltage-Max (Vsup)	-6.3V
Length	3mm
RoHS Status	ROHS3 Compliant

LT1994HDD#PBF Overview

The linear amplifier is packaged in a 8-WFDFN Exposed Pad case. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are located on the operational amplifiers. The input offset voltage is 2mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 14.8mA . The voltage gain should stay at 100dB. Op amp ic has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. During testing, the instrumentation amplifier resistance should remain within a range of 700kOhm.

LT1994HDD#PBF Features

8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
Resistance of 700kOhm

LT1994HDD#PBF Applications

There are a lot of Linear Technology/Analog Devices LT1994HDD#PBF Instrumentational OP Amps applications.

Navigation
Displayers for aircraft and air transportation control systems
Television broadcasting equipment
Industrial control system
Signal operation
Multiplication circuits
Vehicle electronics
Oscilloscopes
Scintillation detectors
Power transmission