LT3752EFE#TRPBF

LT3752EFE#TRPBF Overview

With a 38-PowerTFSOP (0.173, 4.40mm Width), 31 Leads package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). A 6.5V~100V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 100kHz~500kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 31 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Searching "LT3752" will return other relevant dc to dc converter ics. There are 38 pins on switching converter. It is set to 95 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The switching controller works at a frequency of 500kHz. It is possible to set the input voltage to 12V for nominal working status.

LT3752EFE#TRPBF Features

Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 500kHz

LT3752EFE#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LT3752EFE#TRPBF DC to DC converter applications.

• CMM
• Drilling machines
• Surge protection circuits
• Radio equipment
• Elevator lighting
• Window air conditioners
• Hydro power
• Serial communication converter
• Geothermal power
• Emergency lighting monitoring equipment