LT4275BHDD#PBF

LT4275BHDD#PBF Overview

Embedded in the Tube package, it is used by many applications.Packaged according to 10-WFDFN Exposed Pad.Controller (PD) is the type of PoE controller.Channels are growing strong/weak depending on the category: 1.Ensure the reliability of the PoE by operating it at -40°C~125°C.The supply voltage of this electrical Po E controller is 23V~60V.Base part numbers LT4275 can be used to establish Po E controllers.A 10 termination corresponds to the practice of terminating a transmission line with an impedance-matching power over ethernet controller.It is capable of producing 25.5W Watts of power at its maximum.As you can see from the image, it is equipped with 10 pin count.There is a supply current of 2mA Max in the system.The Po E controller in question is included in the package Power Management Circuits.It is designed with 10 pins.In order for it to operate, it needs the maximum current (Isup) 2.2mA.Upon reaching 60V for its operation, the maximal current (Vsup) required for its operation is reached.As the current required for its operation (Vsup) reaches 23V, the PoE ethernet controller is operating.Powered by a 23/60V power supply, it runs on batteries.

LT4275BHDD#PBF Features

Tube package
10 pin count
10 pins
23/60V power supplies

LT4275BHDD#PBF Applications

There are a lot of Linear Technology/Analog Devices LT4275BHDD#PBF Power Over Ethernet (PoE) Controllers applications.

• Commercial Information Displays
• Security Cameras
• Single-Port PSE End-Point Applications
• RFID Readers
• Internet Appliances
• IEEE 802.3af Compliant PoE Powered Devices
• 4PPOE
• IEEE 802.3bt (Draft) Compliant Devices
• Pico-base Stations
• High power (>12.95 W) powered devices