LTC1603CG#PBF

LTC1603CG#PBF Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 36-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 36 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 36 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is ±5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1603 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital, Dual describes the type of supply.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 350mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 350mW.The ADC converter consists of 1 elements.The dual supply type of this electronic AD converter is 5V.It operates with the maximal dual supply voltage of 5.25V.It operates with the minimal dual supply voltage of 4.75V.

LTC1603CG#PBF Features

1 Functions
36 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V
1 elements

LTC1603CG#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC1603CG#PBF ADC applications.

• Music recording
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• High Speed Data Acquisition
• Instrumentation and test equipment
• Broadband data applications
• Imaging Systems
• Data Acquisition Systems
• 4-channel data acquisition
• In-building wireless telephony
• Wireless and wired broadband communications