LTC1694-1CS5#TRMPBF

LTC1694-1CS5#TRMPBF Overview

Several packaging options are available for convenient transportation, including SOT-23-5 Thin, TSOT-23-5.Packaged in Tape & Reel (TR) ready for power buffer.The Surface Mount universal mout is designed for easy adaptability.This is one of the most common type of Buffer, Accelerator that can be found.As far as the voltage is concerned, this op amp buffer uses 2.7V~6V volts.For the output quality to be maintained, 1 channels work together.As a result, there is a 2-Wire Bus input that is enabled.To make sure that the cooling system does not malfunction, you should set the operating temperature to 0°C~70°C.Application-specific operational amplifier buffers such as this one are targeted at I2C and other markets.Get more pin-to-pin solutions by searching with "LTC1694".There are two 5 terminals on the op amp buffer and you can find them at the end of the op amp buffer.The peak reflow temperature is 250.With its 5V voltage supply, the splitter can perform many demanding functions that are expected from it.The pinout of a Power buffer begins with the 5 pins of the Power buffer that it possesses.The output is in the form of 2-Wire Bus.The op amp buffers have 5 pins.In this case, they are 60μA op amp buffers.For mounting on PCBs or other boards, there is a Surface Mount.A voltage higher than 6V should not be applied to the repeter. It is not recommended that you do so.To start it up, the splitter will need 2.7V at least.

LTC1694-1CS5#TRMPBF Features

1 channels.
Mainly used in I2C.

LTC1694-1CS5#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices LTC1694-1CS5#TRMPBF Signal Buffers, Repeaters, Splitters applications.

• Network Switches/Routers
• Multidrop Buses
• Portable IPC/HMI
• Digital Cross-Connects
• DSLAMs
• Data or Clock Signal Amplification
• Desktop Computers
• Cable Repeaters
• PECL-to-LVDS Translation
• Cellular Phone Base Stations