LTC2908CDDB-A1#TRMPBF

LTC2908CDDB-A1#TRMPBF Overview

A total of 8 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 6 channels. The purpose of this IC power is to provide you with a reference of 8-WFDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. Power ics operate at 6 supply voltages. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. The pins of the power management system count 8. It is recommended that Vsup should not be less than 500mV for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to LTC2908, which is the base power ics number. In order to operate this power management, it requires 5V volts of power.

LTC2908CDDB-A1#TRMPBF Features

Multi-Voltage Supervisor type
Minimum supply voltage of 500mV

LTC2908CDDB-A1#TRMPBF Applications

There are a lot of Linear Technology/Analog Devices LTC2908CDDB-A1#TRMPBF Voltage Supervisors applications.

• Important electronics for automotive safety
• DSP
• Display equipment
• Embedded computing
• Insulation fault location system
• Linux and server computing
• Microcontroller system
• Automotive permanent magnet synchronous motors
• Battery cars
• Leakage current detection