LTC4300-2IMS8#PBF

LTC4300-2IMS8#PBF Overview

There is a packaging of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transport of the power buffer.Packaged in Tube ready for power buffer.A universal mout that is easy to adapt.It is important to note that this is a typical Buffer, Accelerator type.In order to function, this op amp buffer requires 2.7V~5.5V voltage.For the output quality to be maintained, 2 channels work together.Input is facilitated by 2-Wire Bus.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.Operational amplifier buffers like this are designed to target applications like I2C - Hotswap and others.You can also try searching with "LTC4300" when you need specific pin-to-pin solutions for your special needs.There is a 8 terminal on the op amp buffer, which can be seen in the picture below.Its peak reflow temperature is 260.This splitter can accomplish a great deal of demanding work when supplied with 3.3V voltage.Power buffer pinouts begin with 8 pins.There is a 2-Wire Bus output from it.In addition, it has 8 pins.The op amp buffers belong to the 5.1mA family.The Surface Mount on the board allows it to be mounted on PCBs or other boards.If you feed the repeter with a voltage higher than 5.5V, you are not supposed to use the repeter.

LTC4300-2IMS8#PBF Features

2 channels.
Mainly used in I2C - Hotswap.

LTC4300-2IMS8#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4300-2IMS8#PBF Signal Buffers, Repeaters, Splitters applications.

• Protection Switching
• Medical
• Industrial Server
• Industrial/Embedded PC
• Clock Distribution
• Data or Clock Signal Amplification
• Industrial PCs
• Laptop Computers (for External Video Cards)
• Cable Repeaters
• SATA SSDs or HDDs