LTC4312IDE#TRPBF

LTC4312IDE#TRPBF Overview

Packaged in 14-WFDFN Exposed Pad, power buffer can be easily transported.In Tape & Reel (TR) packages, power buffer is ready to be shipped out.The Surface Mount universal mout allows for easy adaptability to a variety of situations.As a matter of fact, this type is typical of the Buffer, Multiplexer type.For its operation, this op amp buffer uses a voltage of 2.9V~5.5V.It is important that the 1 x 1:2 channels cooperate in order to maintain a high level of output.This facilitates 2-Wire Bus input to the system.For optimal performance, set the operating temperature to -40°C~85°C.There are a variety of applications for this operational amplifier buffer, including I2C - Hotswap.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "LTC4312".There are two 14 terminals on the op amp buffer and you can find them at the end of the op amp buffer.As a result, NOT SPECIFIED is the maximum temperature at which it can be reflowed.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.This Power buffer has a pinout that starts from its 14 pins, which are the first pins on the board.The output of this program is in 2-Wire Bus format.The op amp buffers are of type 7.3mA.Repeters cannot be fed voltages higher than 5.5V.At least 2.9V is required to start it up.

LTC4312IDE#TRPBF Features

1 x 1:2 channels.
Mainly used in I2C - Hotswap.

LTC4312IDE#TRPBF Applications

There are a lot of Linear Technology/Analog Devices LTC4312IDE#TRPBF Signal Buffers, Repeaters, Splitters applications.

• Test Equipment
• Protection Switching
• Cellular Phone Base Stations
• Industrial PCs
• Medical
• Network Switches/Routers
• SATA SSDs or HDDs
• Communications Switchers
• DSLAMs
• Multidrop Buses