LTC4313CDD-1#PBF

LTC4313CDD-1#PBF Overview

This power buffer comes packaged in 8-WFDFN Exposed Pad so that it can be transported easily.Tube packages are ready for power buffer.An easy-to-adjust universal mout is included with the Surface Mount.The type Buffer, Accelerator is typical.To operate this op amp buffer, it requires a voltage of 2.9V~5.5V volts.A total of 1 channels cooperate to ensure high-quality output.As a result, there is a 2-Wire Bus input that is enabled.The operating temperature should be set to 0°C~70°C to avoid mal-function.An operational amplifier buffer like this is targeted at I2C - Hotswap and other applications as well.Search with "LTC4313" to find more pin-to-pin solutions.The op amp buffer has 8 terminals that you can find on the side.There is a peak reflow temperature for this alloy of NOT SPECIFIED degrees Celsius.This splitter is supplied with 3.3V voltage, which allows it to perform a variety of demanding tasks.As far as the pinout is concerned, the Power buffer has 8 pins starting at its 8 axis.Output is expressed in 2-Wire Bus.In other words, it is a 8.1mA op amp buffer.The repeter should not be fed with voltages higher than 5.5V.In order to start up the splitter, it will need at least 2.9V.

LTC4313CDD-1#PBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4313CDD-1#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313CDD-1#PBF Signal Buffers, Repeaters, Splitters applications.

• Servers
• Industrial Server
• Cable Repeaters
• PECL-to-LVDS Translation
• Data or Clock Signal Amplification
• Network Switches/Routers
• SATA SSDs or HDDs
• Add/Drop Muxes
• Cellular Phone Base Stations
• Clock Distribution