LTC4313CMS8-2#PBF

LTC4313CMS8-2#PBF Overview

Packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), power buffer can be easily transported.Packaged in Tube and ready for power buffer.There is a universal mout that makes it easy to adapt to various situations.Speaking of types, this is a typical Buffer, Accelerator.During the operation of this op amp buffer, 2.9V~5.5V voltage is used.Keeping output quality high requires the cooperation of 1 channels.2-Wire Bus input is enabled.To make sure that the cooling system does not malfunction, you should set the operating temperature to 0°C~70°C.Operational amplifier buffers like this are designed to target applications like I2C - Hotswap and others.You can get more pin-to-pin solutions for your specific needs by searching with "LTC4313".An op amp buffer with 8 terminals can be found.Its peak reflow temperature is NOT SPECIFIED when it is being reflowed.As the splitter is supplied with a 3.3V voltage, it is able to perform a wide range of demanding tasks.A Power buffer's pinout begins with its 8 pins.2-Wire Bus capacitance for the input.Pins on its 8 axis are present.The Surface Mount on the board allows it to be mounted on PCBs or other boards.8.1mA is the voltage at which this power buffer operates.The repeter should not be fed with voltages higher than 5.5V.The splitter must have at least 2.9V to be able to start up.

LTC4313CMS8-2#PBF Features

1 channels.
Mainly used in I2C - Hotswap.

LTC4313CMS8-2#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313CMS8-2#PBF Signal Buffers, Repeaters, Splitters applications.

• Storage Area Networks
• Clock Distribution
• Add/Drop Muxes
• Industrial Server
• Clock Distribution
• Data or Clock Signal Amplification
• Network Switches/Routers
• Digital Crossconnects
• Cable Repeaters
• Medical