LTC4313IDD-1#PBF

LTC4313IDD-1#PBF Overview

This power buffer comes in a convenient 8-WFDFN Exposed Pad package for convenient transportation.In Tube packages, power buffer is ready to be shipped out.The Surface Mount universal mout is designed for easy adaptability.The type Buffer, Accelerator is typical.To operate this op amp buffer, it requires a voltage of 2.9V~5.5V volts.2-Wire Bus inputs can be facilitated by it.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.In addition to I2C - Hotswap, this operational amplifier buffer may also be used for other applications.To find more pin-to-pin solutions for your special needs, try searching with the letter "LTC4313" in the search box.There are two 8 terminals on the op amp buffer and you can find them at the end of the op amp buffer.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.Pinouts of a power buffer start from the 8 pins.2-Wire Bus is what it outputs as the output format.8 pins are present on the op amp buffers.A Surface Mount hole allows it to be mounted on a PCB or other board.Using 8.1mA as a voltage, this power buffer operates.A voltage higher than 5.5V should not be applied to the repeter. It is not recommended that you do so.The splitter must have at least 2.9V to be able to start up.The repeater signal implements 1 receivers.

LTC4313IDD-1#PBF Features

Mainly used in I2C - Hotswap.

LTC4313IDD-1#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313IDD-1#PBF Signal Buffers, Repeaters, Splitters applications.

• Industrial/Embedded PC
• Medical
• Communications Switchers
• Digital Cross-Connects
• Add/Drop Muxes
• Test Equipment
• Clock Distribution
• PECL-to-LVDS Translation
• Digital Crossconnects
• Desktop Computers