LTC4313IMS8-3#PBF

LTC4313IMS8-3#PBF Overview

For convenience, power buffer comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Currently, this power buffer is available for shipping in Tube packages.The Surface Mount universal mout is designed for easy adaptability.As a matter of fact, this type is typical of the Buffer, Accelerator type.As a result, the op amp buffer is powered by 2.9V~5.5V voltage.Hence, it facilitates the entry of 2-Wire Bus into the system.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The operational amplifier buffer targets I2C - Hotswap applications and others.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "LTC4313".The op amp buffer has 8 terminals that you can find on the side.Reflow temperature is NOT SPECIFIED at its peak.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.The output of this program is in 2-Wire Bus format.The 8 pins are on it.The Surface Mount on the board allows it to be mounted on PCBs or other boards.There is a voltage of 8.1mA which is used to power this power buffer.It is not recommended to feed the repeter with a voltage higher than 5.5V.To start it up, the splitter will need 2.9V at least.There are 1 receivers implemented in this repeater signal.

LTC4313IMS8-3#PBF Features

Mainly used in I2C - Hotswap.

LTC4313IMS8-3#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4313IMS8-3#PBF Signal Buffers, Repeaters, Splitters applications.

• Industrial/Embedded PC
• Portable IPC/HMI
• Storage Area Networks
• Network Switches/Routers
• Backplane Interconnect
• Data or Clock Signal Amplification
• Multidrop Buses
• Laptop Computers (for External Video Cards)
• Add/Drop Muxes
• Industrial PCs