LTC4352IDD#PBF

LTC4352IDD#PBF Overview

The case is 12-WFDFN Exposed Pad-shaped. Tube cases are suitable for packing the part. There are two ways in which this part is mounted. A voltage of 2.9V~18V is applied to it. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. A component connected in Redundant Power Supplies, Telecom Infrastructure would be a good fit for it. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. A N-Channel-type FET can be identified. Among the options available for the part are 12 terminations. Pins are attached to it using 12 pins. LTC4352 is the basis for the part. Powered by 12V, it is capable of delivering its performance to its customers. For 250, the peak reflow temperature of this part is used. It is necessary to run the supply current of the part at 1.4mA in order to make it work. This part is part of the Power Management Circuits family of parts. Among the pins on the part are 12 pins. This part requires a voltage supply (Vsup) of 2.9V or greater. It is possible to use the chip with voltages greater than 18V volts. In terms of output current, the part can be delivered under 1.5A output current. There is a maximum voltage of 12V at its output.

LTC4352IDD#PBF Features

in a 12-WFDFN Exposed Pad case
FET Type: N-Channel
12 terminations
Peak Reflow Temperature (Cel) : 250

LTC4352IDD#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC4352IDD#PBF Ideal Diode controller applications.

• Cell phones
• PCs
• Power Tools
• Active OR-ing of Redundant (N+1) Power Supplies
• Automotive USB hubs
• Power supply reverse polarity protection
• Head Unit
• Industrial transport
• Modems
• Automotive ADAS systems - camera