LX5250CDB

LX5250CDB Overview

It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 9 termination. Its low package cost makes it well known in the electronics industry. The Packaging follows Tape & Reel (TR)'s materials. The mounting on the PCB is done with Surface Mount. In order to prevent overheating, the Operating Temperature should not exceed 0°C~70°C degrees Celsius. This is a standard-qualified material. Ensure normal operation with the 4.75V~5.25V Supply Voltage. You can use Base Part Number LX5250 to locate related parts. There are specific uses for the 36 pins. These lines are devoted exclusively to the transmission of signals or intelligence and are either public or private. Keeping the supply voltage at 4.75V is essential for high efficiency. This device has a Surface Mount-mount. 36 pins, which are pronged contacts, are used in computers and other communications devices. A current supply must be provided to 5.25V so that it can function properly. SINGLE ENDED TERMINATION REQUIRES 3.5V TO 5.25V SUPPLY, for example, is added.

LX5250CDB Features

9 terminations
Tape & Reel (TR) package
LX5250 family
36 pin count
9 signal lines
36 pins

LX5250CDB Applications

There are a lot of Microsemi Corporation LX5250CDB Signal Terminators applications.

• Disk array (RAID)
• Storage area networks (SAN)
• Programmable logic controller
• Remote input module
• Desktop PCs
• IEC61131-2 type 1, 2 and 3
• CD-ROM drives
• tape drives
• SCSI cable
• Optical disk drives