M38510/31202BEA

M38510/31202BEA Overview

A CDIPpackage is used for this device. Using 16terminations, it can be configured. 5Vis fully flexible due to its voltage supply. The device contains 1terminations. In total, there are 16pins on the component. In this case, it is packaged as Rail/Tube. In the circuit, 16pins are used to connect other components. It is mounted in the manner of [0]. In this case, it emerges as a member of the LS family. As far as the device is concerned, there are 4bits of information. In this device, the temperature grade is MILITARY. From the voltage source, there is a voltage of 5V volts. To operate, it requires a supply voltage of 5V volts. Long-term operation at 125°Cwith acceptable electrical stability is possible. An operating temperature range is specified with a lower limit generally set at -55°C degrees Celsius. A maximum voltage of 5.5Vcan be reached by the device. It is possible to supply the device with a voltage as low as 4.5V. This electronic part belongs to the Arithmetic Circuit family. ADDER/SUBTRACTOR is the logic IC type it uses. When a high-level voltage is applied to the output, there is -400μA current flowing into it. There is 4mA current flowing into the output terminal at a specified low-level voltage.

M38510/31202BEA Features

Embedded in the CDIP package
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type

M38510/31202BEA Applications

There are a lot of Texas Instruments M38510/31202BEA Counters & Dividers applications.

• DIVISION
• Time delay circuits
• Fixed or Programmable Frequency Division
• LINEARIZATION
• Frequency dividers
• Fixed and programmable counters greater than 10
• VHF, UHF, FM, AM, etc.
• Frequency dividing circuits
• Communications Digital Frequency Synthesizers;
• Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters