M4-128N/64-7JC

M4-128N/64-7JC Overview

The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).84-LCC (J-Lead)is the package in which it resides.The device is programmed with 64 I/Os.There are 84 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.It is a part of the family [0].As a result, it is packaged as Tube.A reliable operation is ensured by the operating temperature of [0].It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the MACH? 4 series.84pins are programmed on the chip.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.For digital circuits, there are 5000gates. These devices serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 84 pins.A maximum supply voltage of 5.25Vis used in its operation.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.The system runs on a power supply of 5V watts.It is recommended that the maximal frequency be lower than 182MHz.There are 2 dedicated inputs used to detect the status of input signals.

M4-128N/64-7JC Features

84-LCC (J-Lead) package
64 I/Os
The operating temperature of 0°C~70°C TA
84 pin count
84 pins
5V power supplies

M4-128N/64-7JC Applications

There are a lot of Lattice Semiconductor Corporation M4-128N/64-7JC CPLDs applications.

• I/O expansion
• Digital designs
• Cross-Matrix Switch
• State machine design
• Digital multiplexers
• I2C BUS INTERFACE
• Address decoding
• Boolean function generators
• Power automation
• ON-CHIP OSCILLATOR CIRCUIT