M4A3-32/32-7VC

M4A3-32/32-7VC Overview

Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 44-TQFP package.In this case, there are 32 I/Os programmed.44terminations have been programmed into the device.There is a QUADterminal position on the electrical part in question.The power supply voltage is 3.3V.This part is in the family [0].Trayshould be used to package the chip.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.In this chip, the 44pins are programmed.When using this device, YEScan also be found.Its related parts can be found in the [0].In digital circuits, 1250gates serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.A total of 44pins are provided on this board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for this device to operate.In total, there are 160programmable I/Os.125MHzis the maximum frequency.

M4A3-32/32-7VC Features

44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins

M4A3-32/32-7VC Applications

There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7VC CPLDs applications.

• Protection relays
• I/O PORTS (MCU MODULE)
• State machine design
• Timing control
• DDC INTERFACE
• Custom state machines
• Dedicated input registers
• Programmable polarity
• Digital designs
• USB Bus