M4A5-32/32-5VC

M4A5-32/32-5VC Overview

There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].In this case, there are 32 I/Os programmed.It is programmed that device terminations will be 44 .This electrical part is wired with a terminal position of QUAD.The power supply voltage is 5V.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.A reliable operation is ensured by the operating temperature of [0].There should be a Surface Mounton the chip.As part of the ispMACH? 4Aseries, it is a type of FPGA.In this chip, the 44pins are programmed.If this device is used, you will also be able to find [0].M4A5-32contains its related parts.The 1250gates serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is recommended that data be stored in [0].Surface Mountis the mounting point of this electronic part.The 44pins are designed into the board.It operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.A power supply of 5Vvolts is required to operate this device.There are 516 programmable I/Os in this system.The maximum frequency should not exceed 167MHz.

M4A5-32/32-5VC Features

44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies

M4A5-32/32-5VC Applications

There are a lot of Lattice Semiconductor Corporation M4A5-32/32-5VC CPLDs applications.

• Custom state machines
• State machine design
• Address decoders
• Software Configuration of Add-In Boards
• Storage Cards and Storage Racks
• Boolean function generators
• Code converters
• Power automation
• I/O PORTS (MCU MODULE)
• Cross-Matrix Switch