M5-192/120-15YC/1

M5-192/120-15YC/1 Overview

There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 160-BQFP package containing it.It is equipped with 120I/O ports.There are 160 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].There should be a Surface Mounton the chip.This type of FPGA is a part of the MACH? 5 series.There are 160 pins on the chip.It is also possible to find YESwhen using this device.There are related parts in [0].As a building block for digital circuits, there are 7500gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is adopted to store data in [0].Surface Mountis used to mount this electronic component.There are 160 pins on the device.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.The system runs on a power supply of 5V watts.It is recommended not to exceed 83.3MHzin terms of frequency.

M5-192/120-15YC/1 Features

160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
160 pins
5V power supplies

M5-192/120-15YC/1 Applications

There are a lot of Lattice Semiconductor Corporation M5-192/120-15YC/1 CPLDs applications.

• Programmable power management
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• State machine control
• D/T registers and latches
• Cross-Matrix Switch
• I/O expansion
• Software-driven hardware configuration
• Parity generators
• STANDARD SERIAL INTERFACE UART
• Reset swapping