M5LV-512/120-12YC

M5LV-512/120-12YC Overview

There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the 160-BQFP package.It is programmed with 120 I/Os.Trayis the packaging method.A reliable operation is ensured by the operating temperature of [0].Mount the chip by Surface Mount.The MACH? 5series comprises this type of FPGA.The M5LV-512can be used to identify its related parts.In digital circuits, there are 20000gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountis used to mount this electronic component.The device is designed with pins [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.Initially, it requires a voltage of 3Vas the minimum supply voltage.In total, there are 48programmable I/Os.There should be a lower maximum frequency than 71.4MHz.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.

M5LV-512/120-12YC Features

160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pins

M5LV-512/120-12YC Applications

There are a lot of Lattice Semiconductor Corporation M5LV-512/120-12YC CPLDs applications.

• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Digital designs
• Voltage level translation
• Address decoders
• Bootloaders for FPGAs
• Timing control
• Custom shift registers
• Discrete logic functions
• Power up sequencing
• STANDARD SERIAL INTERFACE UART