M74HC109M1R

M74HC109M1R Overview

16-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is included in the Tubepackage. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. It is operating at a temperature of -55°C~125°C TA. The type of this D latch is JK Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 67MHz. The element count is 2 . There is a consumption of 2μAof quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the M74HC109family make up this object. Power is supplied from a voltage of 4.5V volts. This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of HC/UH. It is mounted by the way of Surface Mount. It is designed with 16 pins. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. Vsup reaches 6V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. Currently, there are 5 lines of input.

M74HC109M1R Features

Tube package
74HC series
16 pins

M74HC109M1R Applications

There are a lot of STMicroelectronics M74HC109M1R Flip Flops applications.

• Memory
• Latch-up performance
• Single Down Count-Control Line
• Computers
• Frequency division
• Differential Individual
• Bounce elimination switch
• Shift Registers
• Convert a momentary switch to a toggle switch
• Divide a clock signal by 2 or 4